How to fasten the windbreaker belt

Release time : 03/14/2025 09:30:02

Autumn is approaching, and many women are beginning to wear windbreakers.

While a windbreaker worn open adds a cool and trendy flair, pairing it with a belt adds a distinctive touch.

Do you know how to tie a belt on a trench coat? Today, let's learn how to do it! MMS, mark this down.

When it's cold, tie the trouser belt to keep warm.

If you notice your body proportion when wearing a windbreaker, you can still make it look better by tying the belt.

How to tie a belt on a trench coat? Are you familiar with it? If not, or if you want to learn more, here's what you need to know.

1. The bow knot is the most popular belt tying style for women with a bow tie look.

Although the bow looks simple, it's not easy to tie it well.

Next, let's talk about how to tie a bow knot.

First, make one belt end longer than the other by about 10cm. Then cross the two belts and fold the one end of the left belt into a loop, then fold the right end over it. Finally, fold it down from under the loop.

2. The bow tie knot is also a favorite of many girls. Although it lacks the sweetness of a bow, it adds a touch of elegance.

Before proceeding, first make a normal double knot, one end on top and the other bottom. Then wrap the bottom end around the top end once more, and then pull it through the loop you just made from top to bottom.

3. If the belt of a windbreaker does not have a metal clasp, you can try this one-piece buckle method. First, adjust the belt to the appropriate position and then, starting from the bottom, thread the two straps through the inside and into the outside of the belt.

If there are metal hooks, simply wrap the belt around once and pass it through the hooks, then adjust the length as needed.

How many different ways can you tie a belt on a trench coat? How to tie it so fashionably without being too basic? This question has been troubling some of us who love wearing trench coats, especially those who like to tie the trench coat's belt behind.

Let's help MMs unravel these confusions, hoping it will be helpful to them.

There are many different ways to tie your belt, but not all of them are suitable for ordinary women. Some ties are complicated and difficult, such as making a knot in the middle of the belt.

So, ladies, it's best to learn the basic knot.

First, place the shorter side underneath the longer one. Then, twist it around slightly and pull the tape tight. Finally, wrap the longer piece from the bottom up on top of the shorter one. That's it!

If you find that the standard type of belt is not so attractive, you can also consider making it a linked type. The specific operation steps are: first make a knot, one end up, the other down, then make the chain link according to the length, and finally adjust it.

After the fitting, carefully check to avoid slipping during walking.

Additionally, you can consider using small accessories to secure the links, making the chain knot more structured and stylish.

How to tie a belt on a women's trench coat: You've chosen a stylish trench coat, and now it's time to pair it with a belt and tie it elegantly.

Some girls don't know how to tie knots, so they need to learn how to tie a belt.

How to tie a lady's trench coat belt, right here.

The flower-style tying is quite similar to the butterfly-style tying, but this style is suitable for thick belts because it creates a prominent flower shape that adds beauty.

The steps are to first wind the belt around, making it shorter, then pull the end up from underneath and knot it into a flower pattern.

The belt tying method of the kimono is based on the Japanese belt tying method.

First, wrap around the waist, cross over at both ends, and place the right end on top. Then, pass the right end through the belt from above downwards, and finally, pull the end up from below into the circle formed by the right end crossing the belt, and simultaneously tighten both ends.

What should I do if my lady's trench coat belt is missing? Trench coats are a popular style for many women, and wearing them beautifully, while the belt in the trench coat plays an "eye-catching" role.

What if the belt gets lost? MMs, let's continue reading.

Step 1: Look for alternatives.

Losing the belt of a windbreaker doesn't mean the windbreaker can't be worn again. As long as you find a replacement, you can still make the windbreaker look beautiful.

Typically, belts in the same color as your outfit can serve as substitutes for a trench coat's belt.

Step 2: Place the windbreaker properly.

Find the belt and arrange it properly before trying to put it on.

If there are no exceptions, then it's time to fasten the belt.

Step Three: Tightening and forming.

First, cross the belts together by tying them. The long belt should be on the right and the short belt on the left.

Next, take a short belt and make a loop by folding it over. Then, fold the long belt in half from under the loop and naturally pull the loop out to form a knot.

The maintenance of the belt on a trench coat is just as important as the care of the jacket itself.

How to Maintain the Button on a Windbreaker Belt? Momnet has compiled maintenance tips for the button of a windbreaker belt, and girls might want to take a look.

1. Maintenance methods for leather-style windbreaker belts: Although there are many types of leather, the most important thing to focus on is prevention of mold growth.

If the leather is damp and mold has taken root, there is a high likelihood of fungus growth. Therefore, it is recommended that when not using waistbands, they be stored in a ventilated dry place away from water sources, ideally out of direct sunlight to prevent skin from drying and peeling.

If it is wet, immediately wipe it off with a soft cloth and hang it up to dry naturally on the balcony.

If you accidentally get oily stains, you should use a cotton cloth dipped in alcohol to wipe them clean.

2. Maintenance of Cotton Fabric Windbreaker Belts: If the material of a windbreaker belt is cotton and does not contain wool, it can be directly put into a basin for washing.

Before washing, you should remove the metal fasteners to prevent rust.

After washing, remember to put the metal fastener back in the original way.

It is important to note that if not used for an extended period, it should be stored in a bag to prevent dust from contaminating it and should be regularly cleaned.

*The medical information provided in this text is for reference only.

In the event of discomfort, it is advised to seek medical attention immediately. The diagnosis and treatment should be based on a consultation with a professional in person.